Mopstick Handrail – Filigree End Cap 2 Pack

Wall Mounted Mopstick Handrail Filigree End Caps

These slim end caps are designed to fit onto the ends of 54mm diameter mopstick handrails. Supplied in pairs with fixings they simply screw into the end of your mopstick rail giving a decorative finish

Available in the following finished

• Chrome
• Brass
• Black

Mopstick Handrail Fitting Advice

Stairs narrower than 1000mm require a handrail on one side, stairs wider than 1000mm require a handrail on both sides

We recommend finishing your rail before fixing to the wall

• Measure your wall to establish the length of your Mopstick Rail
• Cut your rail to length
• Make sure you keep within 1000mm between Wall brackets
• Measure up 900mm from the front of the step at the top and bottom of the staircase or from the floor on the landing area
• Mark the wall where the brackets will be secured
• Pre-drill the wall and use suitable fixings for the wall type
• Fix the wall brackets
• Offer the mopstick rail onto the wall brackets and mark the screw holes on the rail
• Drill pilot holes into the mopstick rail
• Attach any decorative end caps
• Screw the rail to the wall brackets