Decking Treated Capping Rail 1750mm

Treated Decking Capping Rail

This capping rail is designed to work with American Style Handrails, Bow and Eden Metal Spindle Rails and Clearview Glass rails.

The Treated Decking Capping rail fits onto the top treated rails to form a flat section. This is an optional product and is not essential to the any of the decking systems.

All softwood timber decking components have been pressure treated with tanlith-e outdoor preservative which turns the timber a slight green colour, This colour may not be consistent throughout the whole product therefore if a consistent look is desired this product will need to be stained after installation. All decking products are stored outdoors and may be delivered damp.

Decking Caping Rail Dimensions

1750mm Long  x 80mm Wide x 26mm Deep

Balustrade Guide

It is important to get a good solid fix to the joists with the newel posts, so ensure you plan your joist configuration to allow for handrail lengths no longer than 1795mm. Posts should be lap jointed to the joists and secured with suitable external coach screws or bolts.

Spindles need to be drilled and screwed to the carrier rail using suitable external screws. Ensure you drill pilot holes through the spindles and into the rail. Screwing straight through the spindles without a pilot hole will split the timber

Capping Rails are fixed to the rail using suitable external screws from underneath.

As standard, timber decking materials are made from softwood Scots Pine. There is a natural tendency as the timber weathers for there to be minor surface checking and splitting, caused by the variation in moisture content and the effects of wetting and drying out. These surface defects do not harm the decking structure. As with balustrades, decking should have a proprietary clear water repellent, semi-transparent seal or decking oil applied, for the sake of protection and enhancement. Make sure that the decking is dry before you start. Test by sprinkling drops of water over the surface and if the wood does not absorb the moisture let it dry out and retest before carrying out the work. Note that newly-laid decking should not have any finish applied until it has weathered properly. Add an end-seal preservative to any surface that has been exposed by drilling or cutting

Free Planning Service

Not sure what you need for your deck?

Send us a plan or photographs of yours deck and we will be happy to work out the parts you need and supply you with a quote.

Call 01691 671020 or email info@blueprintjoinery.co.uk

Free Planning Service

Not sure what you need for your deck?

Send us a plan or photographs of your deck and we will be happy to work out the parts you need and supply you with a quote within 48 hours. Call 01691 671020 or email info@blueprintjoinery.co.uk